(RECPL-303)
RANSPOXY-SL23
(Three Part High Solids Self Leveling Floor Coating Epoxy)
OVERVIEW
- RANSPOXY-SL23 is Epoxy based solvent free, pigmented, high solids Self Leveling Floor Coating consumed for protective & decorative coating for concrete surface.
- Being Epoxy based systems it resists Abrasion & Chemicals like Acids, Alkali, few solvents and even to saturated solutions like bleach, sugar solution, urea etc.
PROPERTIES/ADVANTAGES
- Resists Abrasion & Chemicals like Acids, Alkaliline, few solvents.
- Uses as Top Self-Leveling Coat for 2mm Top.
RECOMMENDED USES
RCC, PCC, CC & Metallic Subtracts.RANSPOXY-SL23 is used as a Top Self-Leveling Coat 2mm DFT on the following structures:
- Highly need of Pharmaceutical Industries.
- Need of Food Industries.
- Metallic Bridges & tunnels
- Airport aprons & ramp areas
HOW TO USE |
| Segments | For better adhesion, it is essential to clean the surface on which the material is to be consumed. To remove dust, dirt, or loose particles by emery paper, wire brush. To get optimum performance the surface must be dry, free from oil grease and later sufficiently washed with ample of water. For concrete surface, old concrete surface should be examined for structural soundness. Unsound areas must be repaired. |
APPLICATION OF COATING:
| PRIMER | One coat of RANSPOXY-PMR-250 on Damp Concrete surface
One coat of RANSPOXY-PMR on Concrete surface. One coat of RANSPOXY-LV on Non-porous stone- Kota, Marble, Granite |
FINAL COATING:
- For Concrete surface: [ 2.0 MM DFT ]
Apply one coat of primer as suitable for the surface. Allow primer to cure at the interval of minimum 8-10 hours, Mix the ratio as cited below and lay the floor with specific tools and trowel designed.
| 2.0 mm Mix of one kit of | 11.60 kgs gives | 4.50 sq.mtrs. |
| 3.0 mm Mix of one kit of | 11.60 kgs gives | 3.60 sq.mtrs. |
| KIT 11.60 Kgs [R + H + F = 4.0 + 1.6 + 6.0 ] | ||
PRECAUTION:
Mix only the required quantity of material, which can be utilized within stipulated pot life to avoid solidification.
Wash all the tools and tackles with industrial solvent immediately after the application is completed.
HEALTHY & SAFETY
Avoid prolonged contact with eyes and skin. For detailed information refer to relevant material safety data sheet.
PACKGING STORAGE
RANSPOXY-SL23 is packaged as per given details in Technical Data:–
| Self-life | 12 months when stored in tightly sealed containers below 35˚C |
| Packaging | KIT 11.6 Kgs [R + H + F = 4.0 + 1.6 + 6.0 ] |
| Storage | Material should be stored in an enclosed area and away from direct sunlight and heat. |
PICTURES/IMAGES AT GLANCE
RANS ENGINEERING & CHEMICALS offers a comprehensive range of products and services for most concrete and finishing needs. Please contact the RANS Technical Service Department or your local RANS agent for further information, samples, demonstrations and instructor services. The information given in this leaflet is based upon laboratory research, as well as extensive field work and application. All products are sold subject to standard conditions of sale which are available on request. This information is based on RANS present state of knowledge and is intended to provide general information on RANS’s products and their methods of use. The prospective user is recommended to determine the suitability of RANS’s suggestions and products before adopting them on a commercial scale.
