OVERVIEW

RANSKRYST-COAT is a single component unique reactive chemical treatment for the waterproofing, protection and repair of concrete. RANSKRYST-COAT consists of Portland cement, finely graded sand and active proprietary chemicals. The active chemicals diffuse into the substrate and react with moisture and the constituents of hardened concrete to cause a catalytic reaction.

PROPERTIES

• Becomes an integral part of the substrate
• Can seal hairline cracks up to 0.3-0.4 mm
• Can be applied to the positive or the negative side of the concrete surface
• Non-toxic
• Can be applied on damp surface.
• Cannot puncture, tear or come apart at the seams.
• Does not require sealing, lapping and finishing of seams at corners, edges or between membranes
• Does not require protection during backfilling or during placement of steel, wire mesh or other materials.

AREAS OF USE

• RANSKRYST-COAT is used as a waterproofing system on the following structures:
• Reservoirs • Sewage and Water Treatment Plants • Underground Vaults • Secondary Containment Structures • Foundations • Tunnels and Subway Systems • Swimming Pools • Parking Structures.
• Suitable for horizontal and vertical walls.

HEALTH & SAFETY

Avoid prolonged contact with eyes and skin. For detailed information refer to relevant material safety data sheet.

PACKGING & STORAGE

RANSKRYST-COAT is pre-packaged system available in 20kgs, 25kgs PP/Paper Bags.

Store containers in a clean dry area protected from direct sunlight and extreme heat and cold. Unopened containers can be stored for 12 months