(RECPL-506)
RANSINJECT-2K
(Two-Part Polyurethane Resin Grout)
OVERVIEW
RANSINJECT-2K is two part liquid polyurethane. When mixed in the proportion supplied they react to form a tough, slightly flexible resin. RANSINJECT-2K has a good adhesion to concrete and masonry and when injected into cracks it allows some movement without loss of bond.
PROPERTIES
- Low viscosity: Penetrates fine cracks and cavities.
- Good adhesion: Adheres strongly to dry or moist concrete.
- Flexible: Strong but flexible to withstand differential structural movement.
- Tough: Withstands high hydrostatic pressures.
- Impermeable: On curing it forms a hard mass impermeable to water.
- Suitable for use in high temperature conditions.
AREAS OF USE
Can be injected into cracks in concrete or masonry in dry or damp conditions to form an elastic seal. Caution must be exercised with cracks which are live or filled with dust, water or salts. Use with RANSINJECT-2K to seal cracks in wet conditions in basements, subways and tunnels.
- Water stop system for running water in –
- Defective concrete – (crack & honeycomb)
- Concrete joints
- Drinking water tanks & reservoirs
- Waste water tank
- Sewers, manholes, utility boxes, etc.
- Dams & canals
- Tunnels
- Brick / stone masonry
- Pipe intrusions
- Soil stabilization
HEALTHY & SAFETY
Avoid prolonged contact with eyes and skin. For detailed information refer to relevant material safety data sheet.
PACKGING & STORAGE
RANSINJECT-2K is packaged in 20 Kg Pack, and customize as per client requirements.
Store containers in a clean dry area protected from direct sunlight and extreme heat and cold. Unopened containers can be stored for 6 months.
PICTURES/IMAGES AT GLANCE
RANS ENGINEERING & CHEMICALS offers a comprehensive range of products and services for most concrete and finishing needs. Please contact the RANS Technical Service Department or your local RANS agent for further information, samples, demonstrations and instructor services. The information given in this leaflet is based upon laboratory research, as well as extensive field work and application. All products are sold subject to standard conditions of sale which are available on request. This information is based on RANS present state of knowledge and is intended to provide general information on RANS’s products and their methods of use. The prospective user is recommended to determine the suitability of RANS’s suggestions and products before adopting them on a commercial scale.
