(RECPL-603)

RANSCONMIX-SP110
(Anticorrossive, Set Reducing, Superplasticising Admixture) Astm C-494 Type C En 934-2: T6 & T7 Is 9103: 1999 Bs 5075 Part 1                         

OVERVIEW

RANSCONMIX-SP110 is a high performance set reducing, superplasticising admixture for use in concrete and Portland cement.

RANSCONMIX-SP110 admixture helps in reducing setting times in general and especially in lower atmospheric temperature, produce early high and ultimate increased strengths. It reduces bleed and segregation and improves workability too.

PROPERTIES

  • RANSCONMIX--SP110is a ready to use aqueous solution of modified lignin sulphonic acid and organic salts. It is designed to produce the highest compressive, flexural and tensile strength of concrete by means of water reduction and through control of the cement hydration.
    • Increased Strength without increase in cement content, highly plasticized concrete/ mortar.
    • Improved Durability by increasing density andlowering permeability.
    • Speeds up Constructions, Early de-shuttering could be achieved&Water reduction of almost 15-20%.
    • Extended setting times at higher dosage.
    • Compatibility with all types of Portland cements.
    • Chloride free. It is safe in pre-stressed concreteand with sulphate resisting cements.
    • Reduced segregation.
    • Produces high early strengths.
    • Increase workability and increased strengths.
    • Corrosivity – Non-Corrosive.
    • Suitable for bricklaying mortar mixes.

AREA OF USE

It makes a workable mix with upto 15% less water and gives a stronger, less permeable,durable concrete. It is used in ready mix plants, block and concrete product plants, lightweight and pre

-stressed works and pavers.

To accelerate the setting and early strength gain ofPortland cement concrete and mortar mixes without theintroduction of chloride. Acts as a plasticizer, so givessignificant increases in both ultimate and earlystrengths. Typical applications include pre-castconcrete, concrete placed in cold weather, concrete forrepairs, mortars for brickwork.

RANSCONMIX-SP110 is designed for use as accelerator toprovide high early and higher compressive strengths inconcrete; it accelerate the setting times.

 HEALTHY & SAFETY

Avoid prolonged contact with eyes and skin. For detailed information refer to relevant material safety data sheet.

PACKGING & STORAGE

RANSCONMIX-SP110 is available in 5, 20, 50 and 200 Kgs Pails.

Store containers in a clean dry area protected from direct sunlight and extreme heat and cold. Unopened containers can be stored for 12 months.

Product Datasheet

Product Safety Sheet

PICTURES/IMAGES AT GLANCE

RANS ENGINEERING & CHEMICALS offers a comprehensive range of products and services for most concrete and finishing needs. Please contact the RANS Technical Service Department or your local RANS agent for further information, samples, demonstrations and instructor services. The information given in this leaflet is based upon laboratory research, as well as extensive field work and application. All products are sold subject to standard conditions of sale which are available on request. This information is based on RANS present state of knowledge and is intended to provide general information on RANS’s products and their methods of use. The prospective user is recommended to determine the suitability of RANS’s suggestions and products before adopting them on a commercial scale.

WhatsApp chat
RANS-AT A GLANCE