OVERVIEW

RANSFELT-HF consists of a continuous sheet of Hessian base treated with Bitumen. The coatant i.e. the mixture of Bitumen as specified by I.S. specifications is uniformly applied. The resultant Coated Felt shall be given a superficial application of mineral powder to prevent the layer of the coated felt sticking together in the roll. This also gives useful protection against the effects of the sun and when laid on roofs, does not need further treatment.

PROPERTIES

• Excellent resistance to positive water & vapor pressure.
• Good heat resistance.
• Good dimensional stability under tension.
• Can accommodate structural movements because of excellent flexibility.
• High puncture and fatigue resistance.
• High tensile and tear strengths.
• Resistant to water borne chemicals.

AREAS OF USE

RANSFELT-HF is used as a waterproofing membrane on the following structures:

• Inverted Roofs & parapets
• Terraces, balconies & patios
• Sunken slabs
• Bridges & tunnels
• Airport aprons & ramp areas

GRADES

1. 1. Type 3 Grade I – 1M x 20M (46 Kgs.)
   2. Type 3 Grade II – 1M x 10M (35 Kgs.)

HEALTH & SAFETY

Avoid prolonged contact with eyes and skin. For detailed information refer to relevant material safety data sheet.

PACKGING & STORAGE

RANSFELT-HFis packaged in (20.00 Mtr L x 1.00 Mtr W) as per given details:- 

Weight Available: – 25 Kgs, 30 Kgs, 35 Kgs, 40 Kgs & 46 Kgs.

Store in a clean dry area protected from direct sunlight and extreme heat and cold.Unopened condition rolls can be stored for 12 months. Use oldest material first.