OVERVIEW

In application where heating of bitumen at site is not possible, and where handicaps of wet surfaces have to be overcome, waterproofing can be done using RANSKOTE-PMR.

PROPERTIES

An outstanding quality of RANSKOTE emulsion is the drying from inside so that the evaporation of moisture is outward:

• Continuous, jointless surface over entire insulation.
• Impervious to moisture and perfectly weatherproof.
• Highly resistant to acidic and alkaline corrosive influences.
• Non-inflammable, inert, odorless and taintless.
• Will not flow or creep at any surface temperatures normally encountered.
• Will not flake or crack under winter frost.
• Insulation maintained permanently dry with a high degree of efficiency thus ensuring that fuel and operating costs are kept at a minimum.

AREAS OF USE

RANSKOTE-PMR is used before waterproofing membrane on the following structures:

• Inverted Roofs & parapets
• Terraces, balconies & patios
• Sunken slabs
• Bridges & tunnels
• Airport aprons & ramp areas.

HEALTH & SAFETY

Avoid prolonged contact with eyes and skin. For detailed information refer to relevant material safety data sheet.

PACKGING & STORAGE

RANSKOTE-PMR is supplied in 20kg, 50kg pails/drums.

Store containers in a clean dry area protected from direct sunlight and extreme heat and cold. Unopened containers can be stored for 12 months.