(RECPL-306)
RANSPOXY-PMR250
{Two Part High-Grade Water Base Epoxy}
OVERVIEW
To overcome leakage problems, many conventional methods are prevailing in the market, but these treatments have not proved to be result oriented due to which waterproofing still remains a “Pressing” problem… RANSPOXY-PMR250, an improved grade of Water based Epoxy, High solids two components Epoxy based [i.e. Resin & Hardener] air drying systems, specially formulated for various applications.
PROPERTIES/ADVANTAGES
- It is chemically cures at 300 And no additional curing method is required.
- Being Water based Epoxy, it can be applied on Damp surfaces unlike pure Epoxy resins.
- It is odorless, non-flammable, non-toxic enhance it can even be applied in potable water Tanks.
RECOMMENDED USES
- RANSPOXY-PMR250 is used as a primer coat on the following structures:
- RCC, PCC, CC & Metallic Subtracts.
- Highly need for STP Tanks, Ph. Value works.
HOW TO USE
| Segments | For better adhesion, it is essential to clean the surface on which the material is to be consumed. To remove dust, dirt, or loose particles by emery paper, wire brush. To get optimum performance the surface must be dry, free from oil grease and later sufficiently washed with ample of water. For concrete surface, old concrete surface should be examined for structural soundness. Unsound areas must be repaired. |
PRECAUTION:
Mix only the required quantity of RANSPOXY-PMR250 and RANSPOXY-SLF, which can be utilize within stipulated pot-life period to avoid solidification. Wash all tools and tackles with ample of water immediately after application is completed.
HEALTH & SAFETY
Avoid prolonged contact with eyes and skin. For detailed information refer to relevant material safety data sheet.
PACKGING & STORAGE
RANSPOXY-PMR250 is packaged as per given details in Technical Data:-
| Self-life | 12 months when stored in tightly sealed containers below 35.C |
| Packaging | 20 kgs, 5 kgs, 1 kgs, 1/2 kgs |
| Storage | Material should be stored in an enclosed area and away from direct sunlight and heat. |
PICTURES/IMAGES AT GLANCE
RANS ENGINEERING & CHEMICALS offers a comprehensive range of products and services for most concrete and finishing needs. Please contact the RANS Technical Service Department or your local RANS agent for further information, samples, demonstrations and instructor services. The information given in this leaflet is based upon laboratory research, as well as extensive field work and application. All products are sold subject to standard conditions of sale which are available on request. This information is based on RANS present state of knowledge and is intended to provide general information on RANS’s products and their methods of use. The prospective user is recommended to determine the suitability of RANS’s suggestions and products before adopting them on a commercial scale.
